stellazhu, Author at CMA Testing

1. The U.S. Environmental Protection Agency continues to delay the reporting period for this rule on perfluoroalkyl and polyfluoroalkyl substances (PFAS)

On May 13, 2025, the U.S. Environmental Protection Agency (EPA) announced an interim final rule to amend the data submission period for the Toxic Substances Control Act (TSCA) perfluoroalkyl and polyfluoroalkyl substances (PFAS) reporting rule. For article importers, the data submission period begins on April 13, 2026, and ends on October 13, 2026, last for 6 months. For small manufacturers reporting exclusively as article importers, the data submission period begins on April 13, 2026, and ends on April 13, 2027, last for 12 months. This interim final rule is effective on May 13, 2025. Comments must be received on or before June 12, 2025.

https://www.federalregister.gov/documents/2025/05/13/2025-08168/perfluoroalkyl-and-polyfluoroalkyl-substances-pfas-data-reporting-and-recordkeeping-under-the-toxic

2. Washington State, USA, updates restrictions on the use of lead in cookware

On May 13, 2025, the governor of Washington State, USA, approved the bill SB 5628, amending the lead restriction requirements for cookware. This revised bill represents a significant modification to the previously issued HB 1551 bill in Washington State. The main revisions are as follows:

Add definitions for aluminum or brass cookware, aluminum or brass cookware components, and aluminum or brass utensils.
Beginning January 1, 2026, no manufacturer may manufacture, sell, offer for sale, distribute for sale, or distribute for use in this state aluminum or brass cookware, aluminum or brass utensils, or an aluminum or brass cookware component containing lead or lead compounds at a level of more than

90 parts per million, beginning January 1, 2026;

10 parts per million, beginning January 1, 2028.

https://legiscan.com/WA/text/SB5628/2025

3. Maine, USA, issues the final rule for products containing PFAS

In April 2025, the Maine Department of Environmental Protection (DEP) updated the regulatory requirements related to PFAS and officially approved the final rule of Chapter 90, “Products Containing Perfluoroalkyl and Polyfluoroalkyl Substances”. This rule clearly stipulates the sales ban and notification requirements for products containing PFAS, and sets the relevant conditions for the current unavoidable use (CUU) of intentionally added PFAS.

Product Scope	Substances	Requirements	Implementation Date
Carpet or rug Fabric treatment	PFAS	Prohibited if intentionally added	January 1, 2023
Cleaning produc Cookware product Cosmetic product Dental floss Juvenile product Textile article The prohibition under this subsection does not include Ski wax Upholstered furniture	PFAS	Prohibited if intentionally added	January 1, 2026
Artificial turf Outdoor apparel for severe wet conditions	PFAS	Prohibited if intentionally added	January 1, 2029
Other products	PFAS	Prohibited if intentionally added	January 1, 2032
Cooling, heating, ventilation, air conditioning or refrigeration equipment Refrigerants, foams or aerosol propellants	PFAS	Prohibited if intentionally added	January 1, 2040

This update clearly states that the rule prohibiting the intentional addition of PFAS products takes immediate effect and covers all products already in circulation on the market. Unless the product has been determined to be currently unavoidable for CUU use and the Maine DEP has received a complete notification from the manufacturer. Additionally, manufacturers must provide a compliance statement within 30 days of receiving a request from the DEP to prove that their products do not intentionally contain PFAS.

https://www1.maine.gov/dep/spills/topics/pfas/PFAS-products/index.html

4. CPSC launches self-registration process for the voluntary phase of electronic filing of compliance certificates (eFiling)

On January 8, 2025, the U.S. Consumer Product Safety Commission (CPSC) published a final rule in the Federal Register, requiring electronic filing (eFiling) of compliance certificates to the U.S. Customs and Border Protection (CBP) for the importation of consumer products regulated by the CPSC. The final rule is effective on July 8, 2026. For CPSC regulated products entered from an FTZ for consumption or warehousing, the final rule is effective on January 8, 2027. Recently, the CPSC has launched a self-registration process for eFiling. Importers can independently configure business accounts in the product registration system without having to contact the CPSC to formally request an invitation letter.

https://www.federalregister.gov/documents/2025/01/08/2024-30826/certificates-of-compliance?utm_campaign=subscription+mailing+list&utm_medium=email&utm_source=federalregister.gov

https://www.cpsc.gov/eFiling

5. EU approves the amendment to the POPs Regulation, incorporating the restrictions of UV-328 and Dechlorane-plus

In May 2025, the European Commission announced the adoption of two draft amendments to the POPs Regulation (EU) 2019/1021. These amendments confirm that restrictions on UV-328 and Dechlorane-plus will be added to Annex I of the POPs Regulation. The EU Official Journal is expected to publish these revised regulations shortly and will enter into force 20 days after their publication. The main restrictions are as follows: the concentrations of UV-328 equal to or below 1 mg/kg (0, 0001 % by weight) where they are present in substances, mixtures or article; the concentrations of Dechlorane-plus equal to or below 1 mg/kg (0, 0001 % by weight) where they are present in substances, mixtures or article

https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/13887-Persistent-organic-pollutants-UV-328_en

https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/13888-Persistent-organic-pollutant-dechlorane-plus_en

6. EU approves the revision of restrictions on Perfluorooctanoic acid (PFOA) under POPs Regulation

On May 5, 2025, the European Commission announced the revised draft of the POPs Regulation (EU) 2019/1021 has been adopted, that revised determined restrictions on Perfluorooctanoic acid (PFOA) in Annex I of the POPs Regulation. It is expected that the revised regulation will be published in the Official Journal of the European Union shortly. The main revisions include:

in point 3, the second sentence is deleted: “This exemption shall be reviewed and assessed by the Commission no later than 25 August 2023.”
the following points 4a and 4b are inserted:

4a. For the purposes of this entry, Article 4(1), point (b), shall apply to concentrations of PFOA or any of its salts equal to or below 1 mg/kg (0,0001 % by weight) and to concentrations of any individual PFOA-related compound or combination of PFOA-related compounds equal to or below 10 mg/kg (0,001 % by weight) where they are present in firefighting foam for liquid fuel vapour suppression and liquid fuel fire (Class B fires) already installed in systems. This limit value shall apply until … [OP: please insert date=3 years after the date of entry into force of this Regulation].

4b. For the purposes of this entry, Article 4(1), point (b), shall apply to the sum of the concentration of PFOA, its salts and PFOA-related compounds equal to or below 10 mg/kg (0,001 % by weight) where they are present in fluorine-free fire-fighting foam and originate from fire-fighting equipment which has undergone cleaning in accordance with the best available techniques.

in point 6, the date “4 July 2025” is replaced by “3 December 2025”;
in point 10, the second sentence is deleted;
the following point 11 is added: Articles containing PFOA, its salts or PFOA-related compounds already in use in the Union before or on the date of expiry of the relevant exemption laid down in points 5 (a) to (d) may continue to be used’.

https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/14295-Chemical-pollutants-limits-and-exemptions-for-perfluorooctanoic-acid-PFOA-_e

7. REACH SVHC adds three new intended substances

On May 28, 2025, the European Chemicals Agency (ECHA) added 4,4′-methylenediphenol(Bisphenol F, BPF), 4,4′-(2,2,2-trifluoro-1-(trifluoromethyl)ethylene)bisphenol (BPAF), and its salts, and 1,1’-(ethane-1,2-diyl)bis[pentabromobenzene] (DBDPE) to the SVHC intended substances list. Currently, there are a total of entry 247 substances on the SVHC candidate list, 3 substances under SVHC evaluation, 5 substances on the SVHC intention list, and 1 substance pending decision.

https://echa.europa.eu/registry-of-svhc-intentions

8. The European Commission agrees to add three substances to the Stockholm Convention on Persistent Organic Pollutants

On May 12, 2025, the Official Journal of the European Union published Council Decision (EU) 2025/868, deciding to include chlorpyrifos, medium-chain chlorinated paraffins (MCCPs), and long-chain perfluorocarboxylic acids (LC-PFCAs) in Annex A of the Stockholm Convention on Persistent Organic Pollutants.

https://eur-lex.europa.eu/eli/dec/2025/868/oj/eng#ntr3-L_202500868EN.000101-E0003

9. ECHA proposes restrictions on chromium(VI) substances to protect health

On April 29, 2025, at the request of the European Commission, ECHA has assessed the risks posed by certain Cr (VI) substances to workers and the public as well as the socio-economic impacts of potential restrictions. The Agency concluded that an EU-wide restriction is justified as Cr (VI) substances are among the most potent workplace carcinogens and pose a serious risk to workers’ health. People living near industrial sites that release these substances into the environment are also at risk of lung and intestinal cancers.

All stakeholders have the opportunity to provide information backed by robust evidence during a six-month consultation, which is expected to start on 18 June 2025. ECHA is planning to organise an online information session to explain the restriction process and help stakeholders take part in the consultation.

ECHA proposes to introduce a ban on Cr (VI) substances, except in the following use categories when they meet defined limits for worker exposure and environmental emissions:

Formulation of mixtures
Electroplating on plastic substrate
Electroplating on metal substrate
Use of primers and other slurries
Other surface treatment
Functional additives/process aid

https://echa.europa.eu/-/echa-proposes-restrictions-on-chromium-vi-substances-to-protect-health

10. European Union officially releases a guideline for the measurement of formaldehyde releases from articles and formaldehyde concentrations in the interior of vehicles

On 14 July 2023 the European Commission adopted Commission Regulation (EU) 2023/14642 amending Annex XVII to Regulation (EC) No 1907/2006 of the European Parliament and of the Council as regards formaldehyde and formaldehyde releasers. The Regulation introduced entry 77 to Annex XVII which sets the limit value for formaldehyde emissions to:

0,062 mg/m3 for furniture and wood-based articles and 0,080 mg/m3 for all other articles
0,062 mg/m3 for formaldehyde concentration in the interior of road vehicles

On May 14, 2025, ECHA published a guideline which explains how to measure formaldehyde

releases from articles and its concentrations inside vehicles. The purpose of these explanatory guidelines is to describe the test methods and test conditions to be applied to measure formaldehyde emissions from articles and concentration of formaldehyde in line with the requirements defined in Regulation (EU) 2023/1464 amending Annex XVII to REACH Regulation as regards formaldehyde and formaldehyde releasers (entry 77 of REACH, Annex XVII).

https://echa.europa.eu/view-article/-/journal_content/title/echa-weekly-14-may-2025

https://echa.europa.eu/documents/10162/17233/rest_formaldehyde_guideline_en.pdf

11. Australia proposes the addition of six chemical substances to the Industrial Chemicals Environmental Management Standard (IChEMS)

On April 5, 2025, the Department of Climate Change, Energy, Environment and Water (DCCEEW) of Australia announced its proposal to include six groups of chemical substances in the Australian Industrial Chemicals Environmental Management (Register) Instrument (Compilation No. 3, December 2024). The deadline for submitting comments is May 9, 2025. The proposed chemical groups are:

Decabromodiphenyl ethane (DBDPE)
Mercury and mercury compounds
1,2-dibromoethane
Methylcyclopentadienyl manganese tricarbonyl (MMT)
1,2-dichloroethane
Aryl sulfonate hydrotropes

https://consult.dcceew.gov.au/ichems-s17-proposed-decisions

12. EU SCCS releases latest opinion on the use of Butylparaben in children’s cosmetics

On May 2, 2025, the Scientific Committee on Consumer Safety (SCCS) of the European Union released the latest assessment opinion on the use of cosmetics containing Butylparaben by children. The main contents are as follows:

Based on the safety assessment carried out in consideration of all available information, including the potential endocrine effects, the SCCS is of the opinion that the use of Butylparaben as preservative at a maximum concentration of 0.14 % (as acid) in all cosmetic products included in this exposure assessment is not safe for children between 0.5-1 years, 1-3 years, 3-6 years and 6-10 years when used in combination. With the exception of body lotion, it is safe in single dermal and oral product categories, when used only in the respective product category.
During the public consultation, the SCCS received a proposal from the Applicant to maintain the concentration of Butylparaben at 0.14 % (as acid) in rinse-off products and reduce it to 0.002 % (as acid) in leave-on products and 0.092 % (as acid) in oral care products. Based on these reduced concentrations, Butylparaben is considered safe for children of all age groups and product types included in the assessment, whether used individually or in combination.
This Opinion is not applicable to any sprayable product (including mouth spray) that may lead to exposure of end-user’s lungs by inhalation.

https://health.ec.europa.eu/publications/sccs-opinion-butylparaben-cas-no-94-26-8-ec-no-202-318-7-childrens-exposure_en

13. The EU plans to ban the use of new substances in cosmetics

On May 21 2025, the European Commission officially notified the World Trade Organization of the draft Omnibus Act VIII. This proposal aims to amend Annexes II, III, IV, and V of the Cosmetics Regulation.

The Omnibus Act aims to implement Delegated Regulation (EU) 2024/2564, which introduced newly classified substances as CMR (Carcinogenic, Mutagenic, or Reprotoxic), and incorporates findings from the Scientific Committee on Consumer Safety (SCCS) on the safety of ingredients and their concentration limits.

https://docs.wto.org/dol2fe/Pages/FE_Search/ExportFile.aspx?id=315611&filename=2025/TBT/EEC/25_03493_00_e.pdf&Open=True

https://docs.wto.org/dol2fe/Pages/FE_Search/ExportFile.aspx?id=315611&filename=2025/TBT/EEC/25_03493_01_e.pdf&Open=True

14. Multiple industry standards in the field of textile and garment have been approved and released

On May 9, 2025, the Ministry of Industry and Information Technology of China issued the Announcement No. 7 of 2025, approving the publication of 1128 industry standards. This includes multiple standards related to the textile and apparel industry, such as FZ/T 01057.2-2025″ Test method for identification of textile fibers Part 2: Burning behavior” and FZ/T 01057.3-2025″ Test method for identification of textile fibers Part 3: Microscopy”

https://www.miit.gov.cn/zwgk/zcwj/wjfb/gg/art/2025/art_07619644c589451eb0b3a4302cb8206b.html

15. Two new mandatory national standards for footwear will come into effect on June 1, 2025

On May 28, 2024, the State Administration for Market Regulation (Standardization Administration of the People’s Republic of China) officially released GB 25038-2024 “General safety requirements for footwear” and GB 30585-2024 “Safety technical specifications for infant’s and children’s footwear”. These two mandatory national standards will come into effect on June 1, 2025. The newly revised national standards establish more stringent safety requirements for footwear products.

https://openstd.samr.gov.cn/bzgk/gb/newGbInfo?hcno=2365B99A36F2FA9602255B839F277FE9

https://openstd.samr.gov.cn/bzgk/gb/newGbInfo?hcno=E5D06875803DF79785B1F3A9529E2AFD

Recall

EU rapid alert system for dangerous non-food products (Rapex): https://ec.europa.eu/safety-gate-alerts/screen/search?resetSearch=true

Canada Recall：https://recalls-rappels.canada.ca/en/search/site

Australian Recall：https://www.productsafety.gov.au/recalls

US CPSC Recall：https://www.cpsc.gov/Recalls

Recall case：

We are very pleased to share with you that our minibus body advertising is fully officially launched! Friends who like Dr. A+, come and take photos!

CMA+ is a technology commercialization platform under CMA Testing. It brings together industry, academia and research teams to jointly promote local technological innovation and provide sustainable development technology solutions for enterprises and start-ups. As the advertisement says, “Idea grew? We got you!” CMA+ connects traditional industries with emerging technology fields, helps the local manufacturing industry transform and upgrade, and seizes the opportunities brought by the wave of “new industrialization.”

HKSAR government announced 30 measures to be implemented by the Working Group on Promoting Silver Economy. As an advocate and practitioner of the Silver Economy, CMA Testing supports the new measures and has already started to respond to the increasing market demand for the Silver Economy as early as 2024. Includes :

Cooperate with The Hong Kong Council of Social Service to prepare the first Hong Kong industry initiated “Greater Bay Area standard” for care food ;

CMA+ Pilot Manufacturing Center cooperates with Haier Care to establish a joint silver care product research and experience center, display the high-quality gerontechnology products, including smart home, innovative medicine, health monitoring and accessible travel, and develop Hong Kong gerontechnology and health care, facilitate the exchange and cooperation of Mainland China and Hong Kong ;

CMA and CMA Testing regularly hold workshops to promote the connection between gerontechnology and the market, and introduce the latest gerontechnology research and development results from local universities and research institutions.

We welcome your participation to work with CMA Testing to promote the development of the Silver Economy and create a better world for all stakeholders in our society. If you need any assistance, please contact us.

HONG KONG, June 03, 2025 — Hong Kong-based foodtech startup IXON Food Technology and CMA+, the technology commercialization platform of CMA Testing, today announced a strategic collaboration to fast-track IXON’s innovative food preservation solutions to market. IXON, which has developed advanced sous-vide aseptic packaging (ASAP), a process that sterilizes foods at gentle temperatures (60–80 °C), joined the CMA+ InnoLIFE program in April 2025. This membership grants IXON access to CMA+’s extensive industry–academia network designed to turn cutting-edge research into commercial products.

Since joining, CMA+ has actively supported IXON’s efforts to commercialize its technology in the pet food and senior soft food segments. In return, IXON will conduct all of its food safety and quality analyses at CMA Testing’s accredited laboratories, leveraging CMA Testing’s decades of expertise in food and consumer-product testing.

CMA+ has provided IXON with hands-on guidance and resources to adapt its ASAP technology for new market niches. The collaboration now includes plans for IXON to replicate its production facility at CMA+’s Pilot Manufacturing Center (PMC). The PMC is a dedicated pilot-production hub that provides production sites and supporting facilities for enterprises engaged in experimental production. In practical terms, this means IXON can develop prototypes, integrate automation, and conduct low-volume pilot runs under one roof.

“Access to the PMC will help us accelerate product development and reduce technical risk on the path to scale-up,” said Felix Cheung, CEO of IXON. “Combining CMA+’s incubation support with our ASAP technology, we aim to bring high-quality, shelf-stable foods to market more quickly.”

Mr. Robert LOK, Vice President of CMA and Chairman of CMA Testing, explained that the platform was named “CMA+” to highlight its mission of expanding beyond testing services into technology commercialization. It aims to support the transformation of scientific research into real-world products across government, industry, academia, and research sectors. In addition to providing innovative laboratory facilities, CMA+ offers four key services tailored to the needs of early-stage technology companies: technical and certification support, access to manufacturers and supply chains, financing and legal guidance, and marketing support. By connecting startups with essential resources and partners, CMA+ helps accelerate the path from innovation to market.

About IXON
IXON is a Hong Kong-based company that specializes in food sterilization and preservation. A FoodTech 500 company, IXON is recognized for their proprietary advanced sous-vide aseptic packaging (ASAP) technology that enables the storage and shipment of food products at room temperature. By eliminating the need for cold chain and greatly extending shelf life, ASAP makes food consumption more equitable, convenient, and sustainable. For more information, visit https://www.ixon.com.hk.

About CMA Testing and CMA+
CMA Testing is a third-party quality assurance organization established in 1979, offering testing, inspection and certification services worldwide. It is accredited by HOKLAS and other international bodies, serving industries from consumer electronics to food and personal care. CMA+ is CMA Testing’s newly established Technology Commercialisation Platform, dedicated to bridging industry and academia. CMA+ provides technology and certification support, manufacturing and supply-chain assistance, financing and legal guidance, as well as sales and marketing channels. Its Pilot Manufacturing Center (PMC) offers on-site prototyping and small-scale production facilities to help innovators validate and scale their products. For more information, visit https://www.thecmaplus.org.

We are excited to announce that CMA Testing has partnered with Green Point to launch a comprehensive ESG (Environmental, Social, and Governance) data platform designed specifically for small and medium-sized enterprises (SMEs). This platform aims to simplify ESG data collection, generate evaluation report, and provide detailed ESG scorecards.

Key features include:

✔ Optimal character recognition technology for data collection

✔ Automatic generation of evaluation report

✔ Access to ESG training materials

✔ Support for Traditional Chinese, Simplified Chinese, and English

✔ Net-zero roadmap planning based on Hong Kong’s 2050 targets

✔ Visualization of greenhouse gas data and integration with Spark Chain Network

✔ Gap Analysis for identifying areas for excelling improvement

✔ Provide actionable recommendations ESG performance improvement

Through this platform, we are committed to helping SMEs effectively manage their ESG responsibilities and promote sustainable development.

1. ASTM publishes a standard guide ASTM F3700-25 for selecting and applying analytical methods to evaluate PFAS in consumer and related products

On February 5, 2025, the American Society for Testing and Materials (ASTM) released the standard guide ASTM F3700-25 for selecting and applying analytical methods to evaluate per- and polyfluoroalkyl substances (PFAS), in consumer and related products, providing recommendations to select, apply, and interpret available preparatory and analytical methods and techniques to identify and quantify PFAS in different types of products, including consumer products and related products. This guide provides a flexible, defensible framework applicable to a wide range of product disclosures and restrictions. This framework can be considered when creating regulations and standards to address PFAS in consumer and related products. However, this guide does not set criteria for acceptable concentration limits.

https://store.astm.org/f3700-25.html

2. CPSC releases a final rule for stationary activity center

On March 27, 2025, the Consumer Product Safety Commission (CPSC) published the final rule 16 CFR 1238 for stationary activity centers in the Federal Register, which cites the latest voluntary standard ASTM F2012-24 as a mandatory. The rule is effective on July 5, 2025, unless the Commission receives a significant adverse comment by April 28, 2025. If the Commission receives such a comment, it will publish a document in the Federal Register, withdrawing this direct final rule before its effective date. A stationary activity center as “a freestanding product intended to remain stationary that enables a sitting or standing occupant whose torso is completely surrounded by the product to walk, rock, play, spin or bounce, or all of these, within a limited range of motion”.

https://www.federalregister.gov/documents/2025/03/27/2025-05239/safety-standard-for-stationary-activity-centers

3. New Mexico, USA, enacts the “Per- and Polyfluoroalkyl Substances (PFAS) Protection Act”

On April 8, 2025, the governor of New Mexico, US, signed House Bill 212, formally titled the “Per- and Polyfluoroalkyl Substances Protection Act”. This legislation prohibits the manufacture, sale, or distribution of certain products containing intentionally added perfluoroalkyl or polyfluoroalkyl substances. The primary regulatory requirements are outlined as follows:

Product Scope	Substances	Requirements	Implementation Date
Products	PFAS	Manufacturer must notify the Department of Environment (DOE) if intentionally added	On or before January 1, 2027
Cookware Food packaging Dental floss Juvenile products Firefighting foam.	PFAS	Prohibited if intentionally added	Beginning January 1, 2027
Carpets or rugs Cleaning products Cosmetics Fabric treatments Feminine hygiene products Textiles Textile furnishings Ski wax Upholstered furniture.	PFAS	Prohibited if intentionally added	Beginning January 1, 2028
Products	PFAS	Prohibited if intentionally added, except for exemption.	Beginning January 1, 2032

https://legiscan.com/NM/bill/HB212/2025

4. The EU amends REACH Regulation Annex XVII to expand the scope of restrictions on polycyclic aromatic hydrocarbons (PAHs)

On April 2, 2025, the EU published Regulation (EU) 2025/660 in its Official Journal, amending entry 50 of REACH Regulation Annex XVII and adding entry 50a to restrict 18 polycyclic aromatic hydrocarbons (PAHs) in clay targets. The specific requirements are as follows: Shall not be placed on the market or used, on their own or as constituents of other substances, in clay targets for shooting from 22 April 2026 if they contain more than 50 mg/kg (0,005 % by weight of dry mass of the clay target) of the sum of all listed PAHs. This revised regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

https://eur-lex.europa.eu/eli/reg/2025/660/oj/eng

5. EU approve to revise POPs Regulation to lower the limit for perfluroctane sulfonic acid (PFOS)

On April 14, 2025, the European Commission announced the revised draft of the POPs Regulation (EU) 2019/1021 has been adopted, that revised determined restrictions on perfluroctane sulfonic acid (PFOS) in Annex I of the POPs Regulation. It is expected that the revised regulation will be published in the Official Journal of the European Union shortly. The main revisions include:

The name change from perfluroctane sulfonic acid and its derivatives to perfluroctane sulfonic acid (PFOS), its salts and PFOS-related compounds.
The concentration of PFOS or any of its salts equal to or below 0,025 mg/kg (0,0000025 % by weight) where it is present in substances, mixtures or in articles, the concentration of all PFOS-related compounds equal to or below 1 mg/kg (0,0001 % by weight) where they are present in substances, mixtures or articles.
Remove certain specific exemptions.

https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/13666-Persistent-organic-pollutants-PFOS-limits-and-exemptions_en

6. CEN releases updated standard EN 71-4:2020 + A1:2025 for experimental sets for chemistry and related activities

On April 2, 2025, the European Committee for Standardization (CEN) officially published the updated version of toy safety standard EN 71-4:2020+A1:2025 “Safety of toys, Part 4: Experimental sets for chemistry and related activities”. This standard specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities. This standard applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It is expected to be harmonized under Toy Safety Directive (TSD) 2009/48/EC, upon official acceptance by the European Commission (EC) and by publication in the Official Journal of the European Union (OJEU). Other standards of conflict will be withdrawn by October 31, 2025 at the latest.

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:81258,6036&cs=11492D0D634CD49D6704525E65E92EE9A

7. CEN releases updated standard EN 12586:2025 for soother holder

On April 2, 2025, the European Committee for Standardization (CEN) officially published the updated version of toy safety standard EN 12586:2025 “Child care articles, Soother holder, Safety requirements and test methods”. The updated standard will be officially implemented on October 31, 2025, replacing the previous version EN 12586:2007+A1:2011. This standard specifies safety requirements relating to materials, construction, performance, packaging and labelling of soother holders. It includes test methods for the mechanical and chemical requirements specified. This document covers products for children from birth to 36 months of age, alike the soothers to which these items are connected to. This standard is intended to provide safety requirements for soother holders. All products that allow the attachment of a soother intended for babies and young children to any other object are included in the scope.

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:71742,6233&cs=1DDDC14D5812B1B5ACCD501772D1448BE

8. CEN approve the standard EN 17826:2025 for chemical hazard requirements in child care articles

On April 14, 2025, the European Committee for Standardization (CEN) approved EN 17826:2025 “Child care articles, Chemical Hazards, Requirements”. The standard text will be released soon. This standard restricts 7 types of chemical substances in 14 categories of child care products.

14 categories of children’s care products: Safety barriers, Bedguards, Baby carriers and child carriers, Pushchairs and prams, Carry cots, baby nests and carry cot stands, Bath tubs and bathing aids, Reclined cradles and infant swings, Chair mounted seats, Table mounted chairs, Childs seats for bicycle, Baby bouncers, Children’s harnesses and reins, Baby walking frames, Changing units.
7 categories of chemical substances:19 element migration, 3 phosphorus based flame retardant contents (TCEP, TCPP, TDCP), aniline, 129 allergenic spice contents, formaldehyde content, 7 polycyclic aromatic hydrocarbons (PAHs), and formamide content and releaseolycyclic aromatic hydrocarbons (PAHs), as well as amide content and release amount.

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:65760,6233&cs=117EE0878957A18A1C8C946B13C8E72D0

9. Latest updates on the EU’s PFAS restrictions proposal

On March 19, 2025, in their first meetings of 2025, RAC and SEAC continued evaluating the EU-wide proposal to restrict per- and polyfluoroalkyl substances (PFAS). Both committees reached provisional conclusions for applications of fluorinated gases. Additionally, RAC reached provisional conclusions for transport and energy applications, while SEAC will continue discussing these areas in its June meeting.

https://echa.europa.eu/-/highlights-from-march-2025-rac-and-seac-meetings

10. The EU intends to impose restrictions on (PBDDFs) in the POPs Regulations

On March 25, 2025, the European Chemicals Agency (ECHA) announced its intention to initiate a public consultation regarding the proposal to include polybrominated dibenzo-p-dioxins and dibenzofurans and mixed polybrominated/chlorinated dibenzo-p-dioxins and dibenzofurans, in the list of persistent organic pollutants (POPs) under the Stockholm Convention. Interested parties have eight weeks from the date of publication to submit comments, with the deadline set for May 20, 2025. Polybrominated dibenzodioxins (PBDDs) and polybrominated dibenzofurans (PBDFs), collectively known as PBDDFs, have persistent, bioaccumulation characteristics and long-distance migration capabilities, which may pose significant risks to the global environment and health.

https://echa.europa.eu/proposals-for-new-pop-s

11. European Union officially releases a guideline document on the restrictions of microplastics in Annex XVII of the REACH Regulation

Recently, the European Commission released an explanatory guide for the new entry No. 78 in Annex XVII of the REACH Regulation, which restricts synthetic polymer microparticles (also known as microplastics). This guide aims to assist stakeholders and EU countries in correctly understanding and implementing the new rules. This Guide consists of:

a narrative part (Part I) which describes in simple terms the provisions and the intended implementation of the restriction;

a set of “questions and answers” (Part II) which compiles replies provided to EU countries’ and stakeholders’ questions;

Annexes (Part III) with decision trees and examples of borderline cases.

This Guide emphasizes that polymers must fulfil two conditions to be considered as synthetic polymer microparticles (SPM):

As a first condition, to be regarded as SPM, the polymers have to be, at the same time:

solid
either synthetic polymers, or natural polymers that have been chemically modified
organic (i.e. contain carbon atoms anywhere in their structure)
not degradable, when tested in accordance with Appendix 15 of Annex XVII of REACH
“insoluble”, i.e. they do not have a solubility higher than 2g/L when tested in accordance with Appendix 16 of Annex XVII of REACH.

As a second condition, to be regarded as SPM, the solid polymers must be either:

contained in particles in concentration equal or greater than 1% w/w, i.e. the weight of the polymer(s) is between 1% and 100% of the total weight of the particle containing the polymer(s); or
build a continuous coating around particles (including particles with a liquid core, such as vesicles); no concentration limit applies in this case; the coating needs to be “continuous”

https://single-market-economy.ec.europa.eu/sectors/chemicals/reach/restrictions/commission-regulation-eu-20232055-restriction-microplastics-intentionally-added-products_en

12. EU updates the test method for PFAS in textiles and textile products

On April 30, 2025, the European Committee for Standardization (CEN) published a new version standard EN 17681-1:2025 ” Textiles and textile products – Per- and polyfluoroalkyl substances (PFAS) – Part 1: Analysis of an alkaline extract using liquid chromatography and tandem mass spectrometry “. The updated standard will come into effect on October 31, 2025. This standard specifies a test method, including the degradation of certain side-chain fluorinated polymers during the extraction with simultaneous alkaline hydrolysis, and using liquid chromatography (LC) and tandem mass spectrometry (MS/MS) for identification and quantification of certain per- and polyfluoroalkyl substances (PFAS). The document is applicable to all materials of textile products.

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:77483,6229&cs=1EF7B036C6D16DDC5205F9DF3FF798839

13. UK amends POPs Regulations to add restriction on dechlorane plus (DP), methoxychlor and UV-328

On March 11, 2025, the UK Secretary of State issued Statutory Instruments S.I. 2025 No. 296 and S.I. 2025 No. 297, amending the UK Persistent Organic Pollutants Regulations (POPs Regulations). These amendments incorporate restrictions on Dechlorane Plus (DP), Methoxychlor, and UV-328 into Annex I of the POPs Regulations. The specific restrictions are as follows:: the concentration of Dechlorane plus (DP) in substances, mixtures, or articles shall not exceed 10 mg/kg (0.001% by weight); the concentration of Methoxychlor in substances, mixtures, or articles shall not exceed 0.01 mg/kg (0.000001% by weight); and the concentration of UV-328 in substances, mixtures, or articles shall not exceed 10 mg/kg (0.001% by weight). Furthermore, the amendment establishes limits for Pentachlorophenol (PCP) and Hexachlorobenzene (HCB) at 5 mg/kg (0.0005% by weight) and 10 mg/kg (0.001% by weight), respectively. The new requirements will come into force on April 1, 2025.

https://www.legislation.gov.uk/uksi/2025/296/contents/made

https://www.legislation.gov.uk/uksi/2025/297/contents/made

14. UK amends the “ Furniture and Furnishings (Fire) (Safety) Regulations ”

On April 30, 2025, the UK Secretary of State issued Statutory Instruments S.I. 2025 No. 531, titled “Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2025”. The instruments are intended to amend the “Furniture and Furnishings (Fire) (Safety) Regulations 1988” (FFR Regulations) and shall come into force on October 30, 2025. The primary amendments are outlined as follows:

Remove certain baby and young children’s products from scope of the regulations
Remove the requirement for manufacturers to affix a display label to new products
Extend the time frame for instituting legal proceedings from 6 – 12 months

https://www.legislation.gov.uk/uksi/2025/531/made

15. China’s mandatory standard “Requirements for restricted use of hazardous substances in electrical and electronic products” (draft for approval) is publicly soliciting opinions

On April 14, 2025, the Ministry of Industry and Information Technology of China announced that it had completed the drafting of three mandatory national standards, including the “Requirements for the Restriction of Hazardous Substances in Electrical and Electronic Products” (Draft for Approval). To further solicit opinions from all sectors of society, the standard approval draft and preparation instructions will be publicly announced, with a deadline of April 21, 2025. The “Requirements for restricted use of hazardous substances in electrical and electronic products” stipulate the limit requirements, labeling requirements, and conformity assessment requirements. It applies to electrical and electronic products produced, sold, and imported domestically.

https://www.miit.gov.cn/jgsj/kjs/jscx/bzgf/art/2025/art_0627b5725b8a4974ab1327f568e312b4.html

Recall

EU rapid alert system for dangerous non-food products (Rapex):

https://ec.europa.eu/safety-gate-alerts/screen/search?resetSearch=true

Canada Recall：https://recalls-rappels.canada.ca/en/search/site

Australian Recall：https://www.productsafety.gov.au/recalls

US CPSC Recall：https://www.cpsc.gov/Recalls

Recall case：

The official CMA Testing account is now liveIVE on RedNote! Discover the forefront of the testing and certification industry by following CMA Testing on RedNote!

Here’s what awaits you:

Stay Informed: Get the latest industry insights and updates
Go Behind the Scenes: Explore highlights from our laboratories
Share Your Voice: Address inquiries with great attention

In addition, you’ll unlock:

Expert insights
Exclusive guides
Surprise perks

Don’t wait! Click the link or scan the QR code provided below to join this thrilling journey today!

1. ASTM releases a new standard consumer safety specification for recreational powered scooters and pocket bikes

On December 18, 2024, the American Society for Testing and Materials (ASTM) released a new version standard ASTM F2641-24, which establishes performance requirements, testing methods and marking for recreational powered scooters and pocket bikes intended for use by children age eight to twelve years, and adolescents age thirteen and above. This standard is intended to minimize the risk of injury to an occupant from the normal use and reasonably foreseeable misuse of these e-mobility products.

https://www.astm.org/f2641-24.html

2. OEHHA adds vinyl acetate to the California Proposition 65 list

Recently, the Office of Environmental Health Hazard Assessment (OEHHA) has added vinyl acetate to the Proposition 65 list as a carcinogen. The warning requirement for significant exposures to vinyl acetate will take effect on January 3, 2026.

https://oehha.ca.gov/proposition-65/crnr/vinyl-acetate-added-proposition-65-list-cancer

3. ECHA proposes consultations on three substances to for the identification of substances of very high concern

On February 28, 2025, the European Chemicals Agency (ECHA) conducted a public review of three potential substances of very high concern (SVHC) and the deadline was on April 14, 2025. If the consultation is approved, these three substances will be added to the SVHC list.

These three substances and their hazardous properties as below:

No.	Substances	EC No.	CAS No.	Reason for proposal	Use to
1	1,1,1,3,5,5,5-heptamethyl-3-[(trimethylsilyl)oxy]trisiloxane	241-867-7	17928-28-8	vPvB (Article 57e)	For washing and cleaning products, automotive care products, paints and coatings, adhesives, cosmetics and personal care products.
2	Decamethyltetrasiloxane	205-491-7	141-62-8	vPvB (Article 57e)	For use in washing and cleaning products, polishing and waxing, as well as cosmetics and personal care products.
3	tetra(sodium/potassium)7-[(E)-{2-acetamido-4-[(E)-(4-{[4-chloro-6-({2-[(4-fluoro-6-{[4-(vinylsulfonyl)phenyl]amino}-1,3,5-triazine-2-yl)amino]propyl}amino)-1,3,5-triazine-2-yl]amino}-5-sulfonato-1-naphthyl)diazenyl]-5-methoxyphenyl}diazenyl]-1,3,6-naphthalenetrisulfonate(Reactive Brown 51)	466-490-7	–	Toxic for reproduction (Article 57c)	Textile processing products and dyes

https://echa.europa.eu/es/substances-of-very-high-concern-identification

4. New York State plans to regulate toxic substances in pet products

On January 14, 2025, New York State introduced Bill A1976, which aims to regulate toxic chemicals in pet products and establish a chemical disclosure program for pet products. This act shall take effect on the one hundred twentieth day after it shall have become a law. “Pet product” means a product primarily intended for, made for or marketed for use by a pet, such as toys, car seats, bedding, personalcare products, a product designed or intended by the manufacturer to be chewed by the pet, and pet apparel. “Pet product” does not include a food or beverage or an additive to a food or beverage regulated by the United States Food and Drug Administration.

https://assembly.state.ny.us/leg/?default_fld=&bn=A01976&term=2025&Summary=Y&Actions=Y&Text=Y&Committee%26nbspVotes=Y&Floor%26nbspVotes=Y#A01976

5. CEN releases the test methods for formamide, chlorinated phosphorus flame retardants and isothiazolinones in toy materials

On February 26, 2025, the European Committee for Standardization (CEN) released three standards: EN 71-15:2025 for the determination of formamide content in foam toy materials, EN 71-16:2025 for the determination Certain chlorinated phosphorus flame retardants (TCEP, TCPP, TDCP) in toy materials, and EN 71-17:2025 for the determination of Certain isothiazolinones (MIT, CIT, BIT) in aqueous toy materials. These three standards aim to verify whether the in toy materials comply with the limit requirements stipulated in Appendix C of Annex II of the Toy Safety Directive 2009/48/EC. Additionally, these standards are planned to be given the status of national standards in CEN member states and will replace all conflicting current standards by August 31, 2025.

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:62580,6036&cs=1963FB36920DB5B93CCD02824C71F73D3

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:64038,6036&cs=171F392FAADE273A749FF677411CF8DEA

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:64039,6036&cs=128E49F922F1B7E194FF4F6667C1C5359

6. CEN releases a new version of toy safety standard EN 71-13:2021 +A2:2024

On November 20, 2024, the European Committee for Standardization (CEN) released a new version of toy safety standard EN 71-13:2021+A2:2024 “Safety of toys – Part 13: Olfactory board games, cosmetic kits and gustative games”. This standard specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits. It is expected to be harmonized under Toy Safety Directive (TSD) 2009/48/EC, upon official acceptance by the European Commission (EC) and by publication in the Official Journal of the European Union (OJEU). Other standards of conflict will be withdrawn by June 30, 2025 at the latest.

https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT,FSP_ORG_ID:80598,6036&cs=1966A38203DE7E303EFF694C9A8B11DEA

7. The EU announces draft Toy Safety Regulation (TSR)

On February 7, 2025, the EU issued a notice numbered C/2025/1032 regarding draft Toy Safety Regulation (TSR). This notice aims to improve the functioning of the internal market while providing for a high level of consumer protection and a high level of protection of health and safety of children and other persons by establishing a new Toy Safety Regulation to replace the current Toy Safety Directive 2009/48/EC. If the Regulation is approved, shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

The main revisions of the TSR draft to the TSD include:

Clearly defining two specific types of products as not falling within the scope of toys: skateboards and scooters intended for children with a body mass of more than 20 kg and books intended for children older than 36 months that are made entirely of paper or cardboard, without additional materials or component.
Replacing the current EU Declaration of Conformity (DoC) with the Digital Product Passport (DPP).
Adding new requirements related to mental health and cognitive development.
Providers of online marketplaces shall comply with the requirements set out in Article 22 of General Product Safety Regulation (GPSR, (EU) 2023/988).
Further improving the chemical safety assessment mechanism.
Expanding the categories of carcinogenic, mutagenic or reprotoxic substances (CMRs) prohibited in toys.
Adding specific prohibited substances: The use in toys, components of toys or micro-structurally distinct parts of toys, of per- and polyfluoroalkyl substances (PFAS) and of bisphenols is prohibited. Toys intended for use by children under 36 months or other toys intended to be placed in the mouth shall not contain any fragrances.
Updating the requirements for the migration of specific elements: the number of specific elements subject to migration has been reduced from 19 to 15, with chromium (VI), cadmium, mercury, and lead being singled out, and their total content must not exceed the detection limit.
Adjusting the scope of restricted substances in Appendix C and the specific requirements for some substances.
Updating the relevant regulations on sensitizing fragrances.
Allowing the use of a generic pictogram instead of the word “warning”.

https://eur-lex.europa.eu/eli/C/2025/1032/oj/eng

8. The EU issues Regulation (EU) 2025/351 to revise the regulations related to food contact materials

On 24 February 2025, the Official Journal of the European Union published Regulation (EU) 2025/351, which amends three key regulations concerning food contact materials and articles: Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food, Regulation (EU) 2022/1616 on recycled plastic materials and articles intended to come into contact with foods Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food. This regulation comes into effect on March 16, 2025.

The main revisions to Regulation (EU) No. 10/2011 on plastic materials and articles intended to come into contact with food include: :

A new Article 3a is added, setting out high degree of purity requirements.
Article 4 specifies that only food contact recycled plastics that comply with the Recycled Plastics Regulation (EU) 2022/1616 can be placed on the market.
Article 8 General requirements on substance: Substances used in the manufacture of plastic materials and articles that may be present in the final plastic material, including those manufactured from waste, shall be of a high degree of purity and shall be of a technical quality suitable for the intended and foreseeable use of the materials or articles.
A new Article 14a is added, setting labelling requirements.

A final plastic food contact article intended for repeated use, shall provide to its users, including the following:

Appropriate instructions designed to slow down deterioration of the article;

A description of observable changes of the article that may indicate the deterioration of the article or material;

A warning in case specific damages or foreseeable misuse would cause increased migration or would cause the article to become otherwise unsuitable for further use in contact with food.

Plastic materials and articles intended to be brought into contact with food but which are not yet in contact with it shall be accompanied at the moment of their sale or supply to consumers at retail stage with instructions of use, including the following:

Specific foods or groups of foods,

Contact time and/or temperature, and/or

Heating conditions such as oven and microwave use.

https://eur-lex.europa.eu/eli/reg/2025/351/oj/eng

9. ECHA withdraws hexamethyldisilane from the SVHC intended substances list

On February 28, 2025, the European Chemicals Agency (ECHA) removed hexamethyldisiloxane from the Substances of Very High Concern (SVHC) intended substances list. As of the latest update, the SVHC list now contains 247 entries, the SVHC identification substances list contains 3 entries, the SVHC intended substances list contains 2 entries.

https://www.echa.europa.eu/registry-of-svhc-intentions

10. France issues Act No. 2025-188: Prohibition of PFAS in cosmetics, textiles and footwear

On February 28, 2025, France issued Act No. 2025-188,”Tthe protection of the population from the risks associated with perfluoroalkyl and polyfluoroalkyl substances “.This act specifies that from January 1, 2026, the production, import, export and sale of cosmetics, waxes, textile clothing, footwear and waterproofing agents for consumers’ use in textile clothing and footwear products containing PFAS shall be prohibited; from January 1, 2030, the production, import, export and sale of all textiles containing PFAS shall be prohibited, except for textiles necessary for essential purposes, textiles that contribute to the exercise of national sovereignty and have no alternative solutions, and technical textiles for industrial use.

https://www.legifrance.gouv.fr/jorf/id/JORFTEXT000051260902

https://www.legifrance.gouv.fr/download/pdf?id=z1qB8sWbalojVtx8AaeSDvW-c5JqEb-SEAz0MfCl1vU=

11. Canada publishes Certain Products Containing Toxic Substances Regulations: SOR/2025-36

On March 12, 2025, Canada published the SOR/2025-36 “Certain Products Containing Toxic Substances Regulations” in the Canada Gazette. The Regulations prohibit the manufacture and import of sealant products containing coal tars and PAH levels over 1000 parts per million (ppm) by October 1, 2025, with a prohibition on sales by December 31, 2025. Certain exemptions apply, including for products manufactured for export or in transit through Canada. Temporary exemptions are provided for specific industrial uses of coal tar-based sealants until July 1, 2028. The Regulations repeal and replace the 2-Butoxyethanol Regulations.

https://gazette.gc.ca/rp-pr/p2/2025/2025-03-12/html/sor-dors36-eng.html

12. Multiple national standards for food contact materials have been approved for release

On March 27, 2025, the National Health Commission of China issued Announcement No. 2 of 2025, approving the release of 50 new national food standards. Among them, there are five testing standards for food contact materials in the GB 31604 series and one amendment to the additive standard GB 9685-2016, which is the 1st amendment. The GB 31604 series testing standards will all come into effect on September 16, 2025. The amendment to the additive standard GB 9685-2016 took effect from its approval date of March 16, 2025.

https://sppt.cfsa.net.cn:8086/db?type=1&guid=0E99F438-65C1-4622-B720-C5F8309ABE5E

13. New national standards for prepackaged food labels and prepackaged food nutrition labels have been released

On March 27, 2025, the National Health Commission of China released the new versions of GB 7718-2025 “General Rules for Food Safety National Standards – Prepackaged Food Labels” and GB 28050-2025 “General Rules for Food Safety National Standards – Nutrition Labeling of Prepackaged Food”. GB 7718-2025 applies to the labels of prepackaged food provided directly to consumers and those not provided directly to consumers. It does not apply to the labels of food storage and transportation packaging that provide protection for food, the labels of bulk food and the labels of ready-made and on-site-prepared food. GB 28050-2025 applies to the nutrition labels of prepackaged food provided directly to consumers. Labels for non-directly provided prepackaged food and food storage and transportation packaging, if they indicate nutrition labels, should also be implemented in accordance with this standard. Both standards will be officially implemented on March 16, 2027, with a 2-year transition period.

https://sppt.cfsa.net.cn:8086/db?type=1&guid=0E99F438-65C1-4622-B720-C5F8309ABE5E

14. The new version of the national mandatory standard GB 15979-2024 “Hygienic requirements for disposable sanitary products” is about to be implemented

On June 25, 2024, the State Administration for Market Regulation (State Administration for Market Regulation) issued the mandatory national standard GB 15979-2024 “Hygienic requirements for disposable sanitary products”, which will come into effect officially on July 1, 2025. The standard specifies the hygiene requirements for raw materials, production process, product, packaging, transportation and storage, as well as labeling of disposable hygiene products. It describes the corresponding testing methods and is applicable to disposable hygiene products for sale and use.

https://std.samr.gov.cn/gb/search/gbDetailed?id=1BD5B9878E692FCEE06397BE0A0A10CC

15. The mandatory national standard GB 44702-2024 “Specification for the limitation of harmful substances found in watch casings contacting directly with skin” is about to be implemented

On September 29, 2024, China’s State Administration for Market Regulation (National Standardization Administration) released the mandatory standard GB 44702-2024 “Specification for the limitation of harmful substances found in watch casings contacting directly with skin”, which will come into effect on October 1, 2025. This standard applies to watch appearance components made of metal, metal ceramics, leather, plastic, rubber, synthetic sapphire, inorganic glass, and fiber composite materials that come into direct contact with human skin.

https://std.samr.gov.cn/gb/search/gbDetailed?id=23EE8C718E30E8A3E06397BE0A0AC332

Recall

EU rapid alert system for dangerous non-food products (Rapex):

https://ec.europa.eu/safety-gate-alerts/screen/search?resetSearch=true

Canada Recall：https://recalls-rappels.canada.ca/en/search/site

Australian Recall：https://www.productsafety.gov.au/recalls

US CPSC Recall：https://www.cpsc.gov/Recalls

Recall case：

Product category	Notification submitted by	Reason for recall
Stroller Fans	US	The stroller fan’s housing allows consumers’ fingers to contact the fan’s blade, posing a laceration injury hazard to small children.
Auto World Unassembled Deluxe Pit Kit Slot Cars	US	The recalled unassembled Deluxe Pit Kit slot cars violate the mandatory federal regulation for magnets because the magnets used to power the car are loose prior to assembly, posing an ingestion hazard to children. Assembled models do not pose this risk and are therefore not subject to this recall.
Braided Crib Bumpers	US	The recalled crib bumpers violate the federal crib bumper ban, posing a deadly suffocation hazard to infants. Padded crib bumpers are banned by the federal Safe Sleep for Babies Act.
Children’s Bathrobes	US	The recalled children’s bathrobes violate federal flammability regulations for children’s sleepwear, posing a risk of burn injuries and death to children.
Underwater scooters and replacement batteries (black batteries only)	US	The lithium-ion batteries can overheat and ignite, posing a fire hazard to consumers.
Desktop Heaters	US	The heater’s fan can fail to turn on and cause the unit to overheat and ignite, posing fire and burn hazards.
Toddler Tower Stools	US	The stools can collapse or tip over while in use, posing serious fall and injury hazards to children.
Retractable Safety Gates	US	The recalled gates violate the federal safety regulations for expansion gates and expandable enclosures because a child’s torso can fit through the opening between the gate and the floor, posing a risk of serious injury or death due to entrapment hazard.
10 Drawer Dressers	US	The recalled dressers are unstable if they are not anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children. The dressers violate performance and labeling requirements of the STURDY Act.
Dressers	US	The recalled dressers are unstable if they are not properly anchored to the wall, posing serious tip-over and entrapment hazards, and the two additional metal support legs also present tripping hazards. The dressers violate performance and warning label requirements of the STURDY Act.
Jewelry Kits	US	The recalled jewelry-making kits contain a resin that, when liquid, can cause skin, eye and respiratory irritation or sensitization when inhaled, touched or ingested. The resin contains an acrylate (hydroxyethylmethacrylate “HEMA”) in amounts prohibited in children’s products by the Federal Hazardous Substances Act. Already created jewelry should be inspected to confirm it is fully cured. If there is liquid or any liquid residue present, the jewelry should not be worn and should be stored away from children. Once cured, the resin no longer presents the hazard.
Steam Espresso machines	US	The brew cup handle can forcefully eject during use, shattering the glass carafe and posing a burn and laceration hazard.
Blackout Roller Window Shades	US	The recalled window shades have long operating cords that can cause death or serious injury to children, due to strangulation and entanglement hazards. The window shades are in violation of the federal regulations for window coverings and present a substantial product hazard. The window shades also violate federal regulations for labeling of window coverings.
Baby book SR/00871/25	Germany	The book has small parts (clothes pegs and wobbling eyes) which can easily detach. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Party-themed toys SR/00861/25	United Kingdom in respect of Northern Ireland	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 0.28% and 0.011% by weight, respectively). The plastic bag of the packaging is too thin. If a child plays with the packaging, the plastic could cover the mouth and nose, causing a risk of suffocation. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
Veterinarian play set SR/00895/25	United Kingdom in respect of Northern Ireland	The plastic material of the product has an excessive concentration of di-‘isononyl’ phthalate (DINP), (measured value up to: 4.9 % by weight). DINP may harm the health of children, causing possible damage to their reproductive system and liver. Moreover, the plush toy dog has small parts (eyes and nose) which can easily detach. A small child may put them in the mouth and choke. Additionally, the plastic of the packaging is too thin. If a child plays with the packaging, the plastic can cover the mouth and nose, causing the child to suffocate The product does not comply with the requirements of the Toy Safety Directive, with the REACH Regulation, nor with the European standard EN 71-1.
Children’s fancy-dress costume SR/01018/25	France	The migration of chromium VI from the toy is too high (measured value up to 0,204 mg/kg). The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
Magnet toy SR/00840/25	Germany	The toy contains small magnets with a high magnetic flux (measured value up to: 398 kG²mm²). If a child swallows the small magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Bouncing balls SR/01028/25	France	The LED light is too strong. Direct viewing of the light could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
Tricycle SR/01041/25	Poland	The sharp edges at the saddle stem can cause cuts. Moreover, inadequate distances between the moving parts of the wheels and frame can cause injuries in case of feet entrapment between moving parts. In addition, the plastic of the packaging is too thin. If a child plays with it, the plastic can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Plastic ball SR/01002/25	Sweden	The migration of lead from the toy is too high (measured value: 0.35 % by weight). Moreover, the plastic material of the plastic balls has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP)(measured values: 7.6 % by weight). The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation and the European standard EN 71-3.
Drone SR/00916/25	United Kingdom in respect of Northern Ireland	The plastic material of the USB cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP) and di-‘isononyl’ phthalate (DINP) (measured values: 1.9%, 0.013%, 0.34% and 0.89% by weight, respectively). The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
Chopsticks SR/00806/25	France	The toy has small parts (the figure’s hands) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Children’s shoes SR/00859/25	France	The tassel and the textile/rhinestone element of the tassel can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the General Product Safety Directive.
Baby walker SR/00875/25	United Kingdom in respect of Northern Ireland	The product can easily collapse if heavy weight is placed on the tray. This could cause injuries to the child and users. The product does not comply with the General Product Safety Regulation
Baby carrier SR/00879/25	United Kingdom in respect of Northern Ireland	The product’s retention function is not adequate. Moreover, the indications for the suitable age range are not correct. In case of a small child, which can’t hold the head up, the head may drop forward while they face outward, and this can cause that the child is not able to breathe, causing the child to suffocate. The product does not comply with the General Product Safety Regulation
Soother holder SR/01072/25	Luxembourg	The beads of the soother holder do not have the required ventilation holes and the garment fastener easily breaks. Small children can put them in the mouth and choke. The product does not comply with the General Product Safety Regulation nor with the European standard EN 12586.
Soother holder SR/00844/25	Germany	The cord of the soother holder is too long. It can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 12586.
Soother holder SR/00843/25	Germany	The product bears a too long cord that can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 12586.
Soother SR/00901/25	Luxembourg	The product has small parts (the teat) which may easily detach. A child may put it into the mouth and choke. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1400.
Soother SR/00922/25	Luxembourg	The soother shield may easily break, creating small parts. A young child may choke. The product does not comply with the General Product Safety Regulation nor with the European standards EN 1400 and EN 12586.
Earrings SR/00941/25	Sweden	The product has an excessive concentration of cadmium (measured value up to 38% by weight). The product does not comply with the REACH Regulation.
Ring SR/00935/25	Sweden	The product has an excessive concentration of cadmium (measured value up to 79% by weight). The product does not comply with the REACH Regulation.
Jewellery set SR/01102/25	United Kingdom in respect of Northern Ireland	The product has an excessive concentration of cadmium (measured value up to 80.8% by weight). This product does not comply with the REACH Regulation.
Children’s coat SR/01020/25	Belgium	The coat bears elastic functional cords with free ends and toggles in the head and neck area. These cords can become trapped during various activities of a child, leading to injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
Children’s dress SR/01027/25	Belgium	The product bears functional cords with free ends and toggles in the waist area. These cords can become trapped during various activities of a child, leading to injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
Children’s flip flops SR/00920/25	Ireland	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to: 0.04% and 11% by weight, respectively). The product does not comply with the General Product Safety Regulation and nor with the REACH Regulation.
Jumping rope SR/01099/25	Poland	The toy contains an excessive amount of diisobutyl phthalate (DIBP) (measured value up to 18.4% by weight). The product does not comply with the REACH Regulation.
Lighter OR/00041/25	Lithuania	The product’s flame extinguishing time can be too long. Furthermore, it lacks the safety warning regarding burning time. The product can therefore ignite a fire, causing burns to the use. The product does not comply with the General Product Safety Regulation.
Pilates ball SR/00816/25	Estonia	The plastic material of the product has an excessive concentration of diisobutyl phthalate (DIBP) (measured values up to 53% by weight). The product does not comply with the REACH Regulation.
Tattoo ink – Permanent makeup SR/00896/25	Germany	The product contains formaldehyde (measured value up to 0.0012%). The product does not comply with the REACH Regulation.
Safety harness SR/00849/25	Italy	The thigh straps of the harness are not resistant enough as they break under a load of 12.63 kN. In the event of a user’s fall, the harness breaking creates a risk of injuries. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 361.
Car floor mats SR/01008/25	Cyprus	The plastic of the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs), notably Benzo (a)pyrene (BaP), Benzo (e)pyrene (BeP), Dibenz(a,h)anthracen (DBAhA), Benzo (k)fluoranthene (BkFA) and Benzo (b)fluoranthene (BbFA) (measured values: 19.7 mg/kg, 145.0 mg/kg, 8.4 mg/kg, 9.7 mg/kg, 18.5 mg/kg by weight respectively). The product does not comply with the REACH Regulation.
Steering wheel cover SR/01109/25	Cyprus	The plastic of the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs), notably Benzo(a)pyrene (BaP) and Benzo(e)pyrene (BeP) (measured values: 3.5 mg/kg and 2.7 mg/kg by weight respectively). The product does not comply with the REACH Regulation.
Neoprene suit SR/01039/25	Germany	The black rubber foam of the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs), notably Chrysen (CHR) (measured values up to 1.90 mg/kg). The product does not comply with the REACH Regulation.
Cosmetic bag SR/01030/25	Sweden	The plastic material of the product’s handle has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to: 4.54 % by weight). The product does not comply with the REACH Regulation.
Head lamp SR/00925/25	Sweden	The solders in the product have an excessive concentration of lead (measured value up to 69.8% by weight). The product does not comply with the requirements of RoHS 2 Directive.
Air conditioner SR/00926/25	Sweden	The solders of the product have an excessive concentration of lead (measured value up to 42% by weight). The product does not comply with the requirements of RoHS 2 Directive.
Mini air cooler SR/00928/25	Sweden	The solders of the product have an excessive concentration of lead (measured value up to 44% by weight). The plastic in the product has an excessive concentration of Polybrominated Diphenyl Ethers (PBDEs) (measured value up to 0.145% by weight). The product does not comply with the requirements of RoHS 2 Directive.
Headband OR/00043/25	Sweden	The solders in the product have an excessive concentration of lead (measured value: up to 55% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of RoHS 2 Directive.
Night lamp SR/00985/25	Sweden	The solders in the product have an excessive concentration of lead (measured value up to 4.90% by weight). The product does not comply with the requirements of RoHS 2 Directive.
Surveillance camera SR/01095/25	Sweden	The solders in the product have an excessive concentration of lead (measured value up to 52% by weight). The product does not comply with the requirements of RoHS 2 Directive.
Karaoke microphone INFO/00021/25	Sweden	The solders in the product have an excessive concentration of cadmium (measured value: up to 0.23% by weight). The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: up to 1.7%, 1.2% and 4.0% by weight, respectively). The product does not comply with the requirements of RoHS 2 Directive nor with POP Regulation.
Wireless microphone SR/01080/25	Sweden	The solders in the product have an excessive concentration of lead (measured value up to 48% by weight). The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), short chain chlorinated paraffins (SCCPs) and lead (measured values up to: 1.0%, 0.2%, 0.97% and 0.25% by weight, respectively). Lead poses a risk to the environment. The product does not comply with the requirements of RoHS 2 Directive nor with POP Regulation.
Children’s camera SR/01073/25	Ssweden	The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values up to 0.42%, 1.6%, 0.34% and 1.7% by weight, respectively). The product does not comply with the requirements of RoHS 2 Directive nor with POP Regulation
Electric toothbrush SR/01083/25	Sweden	The solders in the product have an excessive concentration of lead (measured value: up to 73% by weight). The product does not comply with the requirements of RoHS 2 Directive.

We are thrilled to announce that the brand-new corporate video for the CMA Testing is finally live! The video showcases our unwavering commitment to excellence in testing, certification, and inspection. From rigorous and meticulous testing processes to cutting-edge solutions for advanced industries, the team’s dedication to excellence remains steadfast! CMA Testing takes pride in helping clients enhance their performance and achieve compliance. Looking ahead, as an industry leader, we not only uphold consumer trust but also provide a one-stop solution for technology commercialisation through CMA+, helping innovative companies transform groundbreaking ideas into market-ready products.

Watch now and witness our 45-year journey as we stride towards an even brighter future!

@CMA_Testing

Product category	Sample images	Notification submitted by	Reason for recall
Hair Clips		US	The painted hair clips contain levels of lead that exceed the federal lead paint ban, posing a lead poisoning hazard to children. Lead is toxic if ingested by young children and can cause adverse health issues
Doll Toy Sets		US	The peg dolls’ spherical ends can block the child’s airway, posing a risk of choking and death to children.
Hair Dryers		US	The recalled rollers tile toy violates the mandatory federal regulation for toy magnets because it contains a magnet that can become loose, posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, infection, blood poisoning, and death.
DTR Plush Bag Stitch and DTR Plush Bag Angel		US	The zipper pull on the back of the plush bags can detach, posing a risk of serious injury or death from choking and/or ingestion of the zipper pu
Snowman Toys		US Canada	The top hat on the recalled snowman can break into small pieces, posing a risk of serious injury or death to small children from choking.
Children’s Loungewear Sets		US	The recalled children’s pajama sets violate flammability standards for children’s sleepwear, posing a burn hazard and risk of serious injuries or death to children.
Christmas Tea Light Candle Holders		US	The tea light candle holder can catch on fire, posing a fire and burn hazard.
Baby Convertible High Chairs		US	The high chairs pose a deadly fall hazard to babies because the restraint system is not attached to the product and the locks or latches can fail. In addition, the high chairs pose an entrapment hazard because the opening between the seat and tray is large enough that a child can become entrapped in it. These are violations of the federal regulations for high chairs.
Baby Swings		US	The swings pose a suffocation hazard and a risk of serious injury or death to babies, because they were marketed for infant sleep and have an incline angle greater than 10 degrees, in violation of the Safe Sleep for Babies Act. The swings also fail to meet the mandatory warning requirements under the swing regulations. In addition, the remote control included with the swings contains a lithium coin battery and is missing the required warnings and instructions for consumer products containing button cell and coin batteries under Reese’s Law.
Hair Dryers		US	The handheld hair dryers lack an immersion protection device and can cause death or serious injury due to electrocution or shock if the hair dryers fall into water when plugged in. The hair dryers are in violation of federal regulations for hair dryers and present a substantial product hazard.
15” Submersible RGB LED Lights with remote controls		US	The Submersible RGB LED Light’s remote control has a lithium coin battery that can be easily accessed by children, posing an ingestion hazard. This violates the mandatory federal regulations for consumer products containing button cell or coin batteries. In addition, the recalled products do not have the required warnings. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
Digital Wall Clocks		US	The recalled digital wall clocks violate the mandatory federal regulations for consumer products containing button cell or coin batteries. The remote control for the clock has a lithium coin battery that can be easily accessed by children, posing an ingestion hazard. In addition, the recalled products do not have the warnings required under Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
Child Safety Gates		US	The recalled child safety gates violate the federal safety regulation for expansion gates and expandable enclosures because a child’s torso can fit through the opening between the gate slat and side wall, a child’s torso can fit through the secondary opening, the locking mechanism does not fully engage and/or the gate does not resist a push-out force. These failures pose a risk of serious injury or death due to entrapment and fall hazards.
Adult Portable Bed Rails		US	The recalled bed rails violate federal regulations for adult portable bed rails, posing a serious entrapment hazard and risk of death by asphyxiation. When the bed rails are attached to a bed, users can become entrapped within the bed rail or between the bed rail and the side of the mattress. In addition, the bed rails do not bear the required hazard warning labels.
Adult Portable Bed Rails			The recalled bed rails violate federal regulations for adult portable bed rails, posing a serious entrapment hazard and risk of death by asphyxiation. When the bed rails are attached to a bed, users can become entrapped within the bed rail or between the bed rail and the side of the mattress. In addition, the bed rails do not bear the required hazard warning labels.
65W 30000mAh Portable Chargers		US	The lithium-ion battery in the recalled portable chargers can overheat, posing a fire hazard.
Multi-Function Pressure Cookers		US	The pressure-cooking lid can be opened during use, causing hot contents to escape, posing a risk of burn injuries to consumers.
AC Power Adaptors		US	The AC power adaptors can overheat and ignite, posing burn and fire hazards.
6-Drawer Dresser		US	The recalled dressers are unstable if they are not anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children. The dressers violate the performance requirements of the STURDY Act because they can tip over with fewer than 60 pounds applied horizontally, and the dressers also fail to meet the labeling requirements of the STURDY Act.
Six-Drawer Double Dressers		US	The recalled dressers are unstable if they are not anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children. The dressers violate the performance requirements of the STURDY Act because they can tip over with fewer than 60 pounds applied horizontally, and the dressers also fail to meet the labeling requirements of the STURDY Act.
Kitchen Faucets		US	The recalled faucets were tested and found to contain lead that can leach into water at levels that can be particularly harmful to infants and young children.
Kitchen Faucets		US	The recalled faucets were tested and found to contain lead that can leach into water at levels that can be particularly harmful to infants and young children. The faucets were also found to leach other contaminants.
Magnetic Wireless Power Banks		US	The lithium-ion batteries in the recalled power banks can overheat and ignite, posing a risk of serious injury or death from fire and burn hazards to consumers
Ball runner toy SR/01649/25		Ireland	The top rung of the toy can easily detach, making the small balls inside accessible. A small child can put these balls in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
Plastic ball SR/01641/25		Poland	The toy contains an excessive amount of dibutyl phthalate (DBP) and diisobutyl phthalate (DIBP) (measured values up to 3.75% and 8.5% by weight, respectively). The product does not comply with the REACH Regulation.
Pull-along toy SR/01626/25		France	The battery compartment can be easily opened, leaving the button batteries accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. In addition, the cross section of the rope to pull the turtle is too small. This could cause injuries to the child playing with the toy. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1 and EN 62115.
Wooden toy truck SR/01683/25		Austria	The toy has small parts (wooden parts and screws) that can easily detach. A small child may put them in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Magnetic toy SR/01691/25		Poland	The toy contains small magnets with a high magnetic flux (measured value up to: 50 kG²mm²). If a child swallows the small magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Stress ball SR/01714/25		France	The toy has small parts which can detach (eyes). A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
Water color set SR/01732/25		France	The product contains mercury (measured value: 14.6 %). The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
Puzzle mat SR/01772/25		Italy	The toy can easily break producing small parts. Small children may put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Puzzle mat SR/01771/25		Italy	The toy can easily break producing small parts. Small children may put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Toy wand SR/01753/25		France	Due to the insufficient mechanical strength of the toy, in particular of the unicorn plastic head, a short circuit may occur, breaking the toy. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
Skipping rope toy SR/01756/25		United Kingdom in respect of Northern Ireland	The plastic material of the toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) (measured values up to: 0.04%, 0.03 and 13.85% by weight, respectively). The product does not comply with the requirements of the Toy Safety Directive nor with REACH.
Children’s scooter SR/01768/25		United Kingdom in respect of Northern Ireland	The screw-clamp locking device on the steering column may fail to stop the column from dropping during use. This could cause the child to fall and be injured. Additionally, the product lacks the appropriate instructions for use when folding and unfolding the scooter. If this is not correctly done, it increases the risk of injuries to the user. Moreover, the steering column is in a plastic bag which is too thin. If a child plays with it, the plastic can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive.
Soft toy SR/01725/25		Poland	Small parts can easily detach (plastic eye). As a result, a small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Soft toy OR/00066/25		France	The product has a zipped fastening making the fibrous stuffing material easily accessible. A child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Toy dinosaur SR/01769/25		United Kingdom in respect of Northern Ireland	The product has a small part (the bone intended to be placed in the dinosaur’s mouth). A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive
Toy rattle set SR/01783/25		Poland	The product has protruding parts. A child could put them in the mouth, which could block the airways and cause choking. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Children’s gardening set SR/01831/25		United Kingdom in respect of Northern Ireland	The migration of lead from the yellow paint of the long hoe and the long rake is too high (measured value: 800 mg/kg and 210 mg/kg respectively). The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
Soft toy OR/00068/25		Italy	The fibrous stuffing material of the toy is easily accessible due to the weakness of certain seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Fancy-dress costume SR/01850/25		France	The costume is highly flammable and the flame propagation too high on the white textile of the dress. The costume may catch fire if worn close to an ignition source, resulting in burns. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-2.
Fancy-dress costume SR/01849/25		France	The product has two non-detachable cords on the costume at the bottom of the trousers. The cords may become trapped during various activities of a child, leading to injuries. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1 and EN 14682.
Plastic swing OR/00076/25		Belgium	The product has accessible openings and holes, in which children’s head or neck can become trapped and suffer injuries. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-8.
Radio controlled toy car SR/01876/25		United Kingdom in respect of Northern Ireland	According to the product markings, the product has batteries containing cadmium. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Batteries and Accumulators Directive.
Balloons SR/01944/25		Germany	The rubber of the balloons releases an excessive amount of nitrosamines and nitrosatable substances (measured total value: 2.03 mg/kg and 18.03 mg/kg respectively), among which NDMA. Nitrosamines may cause cancer through ingestion or dermal exposure. The product does not comply with the requirements of the Toy Safety Directive.
LED light SR/01938/25		Germany	The battery compartment can be easily opened, leaving the button batteries accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. In addition, the product can easily break, releasing small parts, that a small child could put in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive not with the European standards EN 71-1 and EN 62115.
Battery-operated toy dog SR/01985/25		Sweden	The solders in the product have excessive concentrations of lead (measured values up to 53% by weight). The product does not comply with the requirements of tRoHS 2 Directive.
Baby sleeping bag SR/01747/25		United Kingdom in respect of Northern Ireland	The hood of the product covers the mouth and/or nose area of a baby. When used in a sleeping environment, this could result in suffocation. The product does not comply with the requirements of the General Product Safety Directive.
Baby sleeping bag SR/01806/25		United Kingdom in respect of Northern Ireland	The sleeping bag has a hood, which may cover the mouth and/or nose area of the baby. This could lead the child to suffocate. The product does not comply with the requirements of the General Product Safety Directive
Baby sleeping bag SR/01818/25		United Kingdom in respect of Northern Ireland	The sleeping bag has a hood, which may cover the mouth and/or nose area of the baby. This could lead the child to suffocate. The product does not comply with the requirements of the General Product Safety Directive.
High chair SR/01891/25		France	The product is not resistant and durable enough, a small child might fall off and be injured if the seat breaks. Moreover, the plastic of the packaging is too thin. If a child plays with it, the plastic can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the General Product Safety Regulation nor with the European standard EN 14988.
Children´s jacket SR/01750/25		Estonia	The product has long functional cords with free ends in the neck area which can become trapped during various activities of a child, leading to strangulation or injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
Children’s jacket SR/01749/25		Estonia	The product has long drawstrings with free ends in the neck area. These drawstrings can become trapped during various activities of a child, leading to strangulation or injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
Earrings SR/01644/25		Sweden	The product has an excessive concentration of cadmium (measured value: 28% by weight). The product does not comply with the REACH Regulation.
Earrings SR/01677/25		Sweden	The product has an excessive concentration of cadmium (measured value: 10% by weight). The product does not comply with the REACH Regulation.
Earrings SR/01678/25		Sweden	The product has an excessive concentration of cadmium (measured value: 22% by weight). The product does not comply with the REACH Regulation.
Earrings SR/01680/25		Sweden	The product has an excessive concentration of cadmium (measured value: 28% by weight). The product does not comply with the REACH Regulation.
Necklace SR/02003/25		Slovakia	The products have an excessive concentration of cadmium and nickel release rate (measured values up to 86.9% and 0.8 µg/cm²/week, respectively). The product does not comply with the REACH Regulation.
Dumbbell SR/01633/25		Finland	The black material in the ends of the dumbbell contains an excessive amount of polycyclic aromatic hydrocarbons (PAHs), notably chrysene (measured value: 14 mg/kg). The product does not comply with the REACH Regulation.
Suitcase SR/01653/25		Finland	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 6.2% and 2.1% by weight, respectively). The product does not comply with the REACH Regulation.
Mug OR/00062/25		Ireland	A defect in the mugs glazing can cause it to crack when boiling water is added, leading to leakage and burns to the user. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13258.
Face mask SR/01705/25		Germany	The product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. Moreover, the product contains lead (measured value: 0.000124 %). The product does not comply with the Cosmetic Products Regulation.
Nail varnish SR/01915/25		Italy	According to the list of ingredients, the product contains trimethylolpropane triacrylate, which use is prohibited in cosmetic products. Trimethylolpropane triacrylate can cause skin and eye irritation and might cause cancer. The product does not comply with the Cosmetic Products Regulation.
Magnetic safety lock SR/01829/25		Poland	Small parts (plastic attachments) can easily detach from the locking mechanism. A small child may put them in the mouth and choke. The product does not comply with the General Product Safety Regulation.
Steering wheel cover SR/01977/25		Italy	The product has an excessive concentration of zinc (measured value: 0.013%). Zinc is toxic and may cause neurological disorders. The product does not comply with the REACH Regulation.
Protective gloves OR/00072/25		Poland	The gloves do not provide adequate protection against abrasion and can easily tear. Therefore, users are not sufficiently protected from sharp objects and risk suffering cuts. The product does not comply with the requirements of the Personal Protective Equipment Directive (PPE) nor with the European standard EN 388.
Cushions SR/01887/25		United Kingdom in respect of Northern Ireland	If close to a flame, the product catches fire and continues burning for an excessive time even after removal of the ignition source. This increases the risk of fire and burns. The product does not comply with the General Product Safety Regulation.
Inflatable swimming seat SR/01867/25		Austria	The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats must be used under constant adult supervision. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138.
Office chair SR/01992/25		Slovakia	The chair is unstable and can tip over during use. Moreover, the seat support structure can deform, or the seat support base can crack, which can result in injury to the consumer’s head, torso, lower and upper limbs. The product does not comply with the General Product Safety Regulation nor with European standard EN 1335-2.
kneepad SR/01973/25		France	The shock-absorbing capacity of the kneepads is insufficient. As a result, the user might suffer injuries in case of an impact. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 1621-2.
Heating plate SR/01681/25		Germany	The electronics inside the product are not sufficiently insulated. Open water containers (poultry drinking bowls) are placed on the product. Water could therefore be spilled on and penetrate the product. Additionally, the housing is made of metal, and there is no earth conductor. Therefore, a short circuit could occur, making the housing live. The user can touch the live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
USB charger SR/01694/25		Lithuania	The device is not resistant to high temperatures and its casing may deform, leaving live parts accessible. The user can access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368.
Portable blender SR/01844/25		United Kingdom in respect of Northern Ireland	The batteries of the product may overheat during charging, presenting a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
Wireless speaker SR/01794/25		United Kingdom in respect of Northern Ireland	The product has poor quality internal connections and wires soldered directly to component tails. In a high vibration environment, the wires could potentially detach and short-circuit, presenting a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
Steamer cap SR/01786/25		Ireland	The fuse in the plug is defective, Therefore, in the event of an over-current, the lack of sand in the product’s fuse can cause the product to overheat, causing electric shock, burns to the user and fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 61000.
Electric fan SR/01878/25		Poland	The electrical insulation of the internal wires is inadequate and the internal wires are improperly secured. The internal wire can detach, resulting in inadequate creepage and clearance distances possibly causing an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2-80.
Circuit breaker SR/02012/25		Germany	With an increased current flow, the trip does not activate within 2 seconds. Therefore, the circuit is not interrupted and the arc does not extinguish, leading the breaker to smoulder or burn. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60898.
Lighting chain SR/02014/25		Hungary	The product has inadequate insulation. The dimensions of the connection plug do not comply with the specifications. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
Lighting chains SR/01864/25		Hungary	The cable is not properly anchored. The accessible wires have inadequate insulation. The structure of the cord extension socket allows single-pole insertion of plugs. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
Dog collar light SR/01987/25		Sweden	The solders in the product have an excessive concentration of lead (measured value up to 62 % by weight). The product does not comply with the requirements of RoHS 2 Directive.

Product category	Sample images	Notification submitted by	Reason for recall
Foldable Travel Hair Dryers		US	The handheld hair dryers lack an immersion protection device that can cause death or serious injury due to electrocution or shock hazards if it falls into water when plugged in. The hair dryers are in violation of the federal regulations and present a substantial product hazard.
Mini Travel Hair Dryers		US	The handheld hair dryers lack an immersion protection device and can cause death or serious injury due to electrocution or shock if the hair dryers fall into water when plugged in. The hair dryers are in violation of the federal regulations and present a substantial product hazard.
Hair Dryers		US	The handheld hair dryers lack an immersion protection device and can cause death or serious injury due to electrocution or shock if they fall into water when plugged in. The hair dryers are in violation of the federal regulations and present a substantial product hazard.
LED Iridescent Bear Lights		US	The power switch on the USB cord can overheat and melt, posing fire and burn hazards.
Tissue Box Toy sold with Fisher- Price 3-in-1 SnugaPuppy Activity Centers		US Canada	The detachable tissue box toy can come apart, exposing the small support brackets, posing a choking hazard to young children.
Multifunctional Puzzle Crab Toys		US	The recalled magnetic Multifunctional Puzzle Crab Toy set violates the mandatory federal regulation for magnet toys, posing an ingestion hazard. When high-powered magnets are swallowed, the ingested magnets can attract each other, or another metal object, and become lodged in the digestive system. This can result in perforations, twisting and/or blockage of the intestines, infection, blood poisoning and death.
Baby bath seats		US	The recalled bath seats violate the federal safety regulation for infant bath seats because the bath seat is unstable and can tip over while in use, and the leg openings are too wide, allowing a baby to slip out of the seat, posing a risk of serious injury or death to babies from drowning.
Baby Bath Seats		US	The recalled bath seats violate the federal safety regulation for infant bath seats, including requirements for stability and leg openings, and can tip over while in use, posing a risk of serious injury or death to babies due to drowning hazard.
Convertible 6-in- 1 High Chair Activity Centers		US	The recalled high chair activity centers violate the federal regulations for high chairs and stationary activity centers. The high chair activity centers pose a deadly entrapment hazard because the leg openings in the seat of the stationary activity center are too wide and a child can become entrapped in it, which is a violation of the federal regulation for stationary activity centers. In addition, the tray can disengage and a child can fall, which is a violation of the federal regulation for high chairs, posing a serious injury hazard.
Convertible and Foldable High Chairs		US	The recalled high chairs pose a suffocation risk because they were marketed for infant sleep and have an incline angle greater than 10 degrees, in violation of the CPSC’ s Infant Sleep Products Rule and the Safe Sleep for Babies Act.
Infant Swings		US	The swings pose a suffocation risk because they were marketed for infant sleep, and they have an incline angle greater than 10 degrees in violation of the Safe Sleep for Babies Act. In addition, the swings fail to meet mandatory warning requirements under the swing standard and are missing the required warnings and instructions for consumer products containing button cell and coin batteries under Reese’s Law.
Glow Sticks and Glasses Party Pack Toys		US	The glow sticks and glasses violate the mandatory federal battery-operated toy regulation because the button cell batteries are in a compartment that can be opened easily without requiring the use of a common household tool. When button cell and coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns or death, posing an ingestion hazard to children.
Wireless Portable Power Banks		US	TThe lithium-ion battery in the recalled power banks can overheat and ignite, posing fire and burn hazards to consumers.
Roller Window Shades		US	The recalled roller shades have long operating cords that can cause death or serious injury to children, due to strangulation and entanglement hazards. The window coverings are in violation of the federal regulations for window coverings and present a substantial product hazard. The shades also violate labeling requirements for window coverings.
Tip-over Restraint Kits		US	The plastic zip tie used with the recalled furniture tip kits can become brittle or break, which can allow a clothing storage unit that is anchored to the wall to detach during a furniture tip-over event, posing a tip-over and entrapment hazard that can result in death or serious injuries to children.
Blender Bottles		US	The blender’s blades can continue to operate when the bottle is not attached to the blender, posing a laceration hazard.
Kids Thrill Shape Sorter Car Toys		US	The recalled shape sorter car toys contain balls that violate regulations banning small parts in toys intended for children under three years of age because they are a choking hazard, and can cause serious injury or death.
LED Strip Lights		US	The recalled lights violate the mandatory federal regulations for consumer products designed to use button cell or coin batteries because the strip lights allow easy access by children to the lithium coin batteries, posing an ingestion hazard. In addition, the recalled products do not have the required warnings. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
12-Volt Children’s Ride-On Tonka Dump Trucks		US	The controller on the recalled ride-on dump trucks can overheat, posing fire and burn hazards.
Magnetic toy set SR/01237/25		Poland	The toy contains small magnets with a high magnetic flux. If a child swallows the small magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Fancy-dress costume SR/01241/25		France	The migration of chromium VI from the toy is too high (measured value: 0.57 mg/kg). Moreover, the migration of lead from the surface material is too high (measured value: 116 mg/kg). The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
Fancy-dress costume SR/01421/25		France	The product has functional cords close to the neck area. The cords may become trapped during various activities of a child, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Fancy-dress costume SR/01436/25		France	The battery compartment can be easily opened, leaving the button batteries accessible. A child may put them in the mouth and swallow them, which could cause damage to the child ’ s gastrointestinal tract and/or choking. Moreover, the tulle skirt is highly flammable and the flame propagation too high. The costume may catch fire if worn close to an ignition source, resulting in burns. The product does not comply with the requirements of the Toy Safety Directive nor with European standards EN 62115 and EN 71-2.
Fancy-dress costume SR/01518/25		France	The product has long functional cords with free ends in the neck area. The cords may become trapped during various activities of a child, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1 and EN 14682.
Children’s rake SR/01250/25		France	The toy has unprotected protruding parts (teeth of the rake). A child could be injured by falling onto the teeth of the metal rake. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Toy chicken SR/01235/25		France	The toy has small parts (wings) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Balloons SR/01263/25		Germany	The rubber of the balloons releases nitrosamines (measured total value: 1.61 mg/ kg). Moreover, the product releases an excessive amount of nitrosatable substances (measured total value: 9.13 mg/kg), which generate nitrosamines. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
Soft toy SR/01271/25		Finland	Finland The plastic of the packaging is too thin. If a child plays with it, the plastic can cover the mouth and nose, causing the child to suffocate. Furthermore, the toy’s electrical wires are too long and can become trapped during various activities of a child, leading to strangulation. Furthermore the fibrous stuffing material of the toy is easily accessible due to the weakness of certain seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Keyring with soft toy SR/01354/25		France	Small parts can easily detach (white plastic ring with metal fastener; plastic eyes and nose). As a result, a small child may put them in their mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Soap bubble toy SR/01229/25		Italy	The soap-bubble solution of the toy is microbiologically contaminated (measured value up to 72.000 CFU/ml). There is a risk of contracting infection as the solution may come in contact with the mouth, hands and eyes. The product does not comply with the requirements of the Toy Safety Directive.
Soap bubble toy SR/01298/25		Italy	The soap-bubble solution of the toy is microbiologically contaminated (measured value up to 290,000 CFU/ml). There is a risk of contracting infection as the solution may come in contact with the mouth, hands and eyes. The product does not comply with the requirements of the Toy Safety Directive.
Wooden puzzle SR/01516/25		Australia	The puzzle has small parts (the squirrel and bird pieces) that can easily detach from the toy. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Toy torch SR/01482/25		France	The LED light is too strong and not properly labelled. Direct viewing could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
Pen SR/01519/25		France	The battery compartment can be easily opened, leaving the button batteries accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
Toy car SR/01520/25		United Kingdom in respect of Northern Ireland	According to the product markings, the product has batteries containing cadmium. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Batteries and Accumulators Directive.
Card holder SR/01372/25		Italy	The product has an excessive concentration of cadmium (measured value up to 0.86% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
Baby pillow SR/01208/25		France	The pillow is not firm enough, leading to a risk of suffocation for the baby if their face is turned towards or leaning against the cushion for a long period. The product does not comply with the General Product Safety Regulation nor with the European standards EN 16890 and EN 1466.
Soother holder SR/01284/25		Norway	The cord of the soother holder is too long. It can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 12586.
Children’s flip- flops SR/01435/25		Norway	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and di-‘isononyl’ phthalate (DINP)(measured values: 3.6% and 20.7% and 0.04% by weight, respectively). Additionally, the product has an excessive concentration of cadmium (measured value: 0.014% by weight). Moreover, the product has an excessive concentration of lead (measured value: 0.12% by weight). The product does not comply with the REACH Regulation.
Children’s sandals SR/01434/25		Norway	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 0.4% and 25.9% by weight, respectively). Moreover, the product has an excessive concentration of lead (measured value: 0.17% by weight). The product does not comply with the REACH Regulation.
Children’s coat OR/00056/25		Ireland	The hood may cover the nose and mouth of a child under six months of age, which could result in suffocation. The product does not comply with the General Product Safety Regulation.
Pencil case SR/01585/25		Norway	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values: 14.66% by weight).. Additionally, the product contains cadmium (measured value: 0.034% by weight). Moreover, the product has an excessive concentration of short chain chlorinated paraffins (SCCPs) (measured value: 0.27% by weight). The product does not comply with the REACH Regulation nor with the Regulation on persistent organic pollutants (POP Regulation).
Backpack with USB SR/01359/25		France	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), benzyl butyl phthalate (BBP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) (sum of measured values: 2300 mg/kg). The product does not comply with the REACH Regulation.
Magnetic buttons SR/01361/25		Italy	The rate of nickel release is too high (measured value up to 5.7 µg/cm²/week). The product does not comply with the REACH Regulation.
Gasket SR/01570/25		The Netherlands	The gasket contains and may release asbestos fibres (measured value up to 30%) which may lead to cancer. The product does not comply with the REACH Regulation.
Jumping rope SR/01431/25		Norway	The plastic material of the product has an excessive concentration of diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) (measured values: 1.03% and 14.69% by weight, respectively). The product does not comply with the REACH Regulation.
High-strength glue SR/01443/25		France	The product does not have the required tactile warning of danger, indicating that the product is a skin corrosive and is not equipped with a child-resistant fastening, which will give easy access to the product. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
Glue OR/00058/25		France	The product contains cyanoacrylates. which causes eye and skin irritation, but does not display the required warnings and hazard labels. Users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes or if it is ingested. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
Hand tools SR/01631/25		Finland	The plastic material of the red handgrip contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 50% by weight). The product does not comply with the REACH Regulation.
Smartwatch OR/00055/25		France	This watch falsely claims to measure blood-glucose levels. An incorrect measurement can lead to poor management of diabetes, which can pose health risks to people with that condition. The product does not comply with the General Product Safety Regulation.
Smartwatch OR/00061/25		France	This watch falsely claims to measure blood-glucose levels. An incorrect measurement can lead to poor management of diabetes, which can pose health risks to people with that condition. The product does not comply with the General Product Safety Regulation.
Slap bracelet set SR/01433/25		Norway	The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and di- ‘ isononyl ’ phthalate (DINP) (measured value: 3.6% and 0.5% by weight respectively. Additionally, the product has an excessive concentration of cadmium (measured value: 0.03% by weight). Moreover, the product has an excessive concentration of lead (measured value: 0.07% by weight). The product does not comply with the REACH Regulation.
Necklace SR/01432/25		Norway	The product has an excessive concentration of cadmium (measured value: 88% by weight). The product does not comply with the REACH Regulation.
Charger SR/01595/25		Sweden	The solders in the product have an excessive concentration of lead (measured value up to 50% by weight). The product does not comply with the requirements of RoHS 2 Directive.
USB charger SR/01596/25		Sweden	The solders in the product have an excessive concentration of lead (measured value up to 25% by weight). The product does not comply with the requirements of RoHS 2 Directive.

Search

Shanghai, China

Shenzhen, China